Printing From Start to Finish
20
Printing on Envelopes
You can load up to 10 envelopes at a time. Follow these steps to print on No. 10 size
envelopes:
1. Load the envelopes short edge first against the right edge of the sheet feeder,
behind the tab. The printable side should be up, and the flap side should be down
and on the left.
2. Press in the locking tab on the left edge guide and slide it against the envelopes.
3. In your application software, set a left margin of approximately 7.6 cm (3 in). Set
a top margin of approximately 5 cm (2 in). Then type the address.
4. Open your printer software and make the following settings:
■
For Paper Type (Windows) or Media Type (Macintosh), select
Plain Paper
■
For Orientation, select
Landscape
■
For Paper Size, select
Envelope #10 (4 1/8 × 9 1/2 in)
(Windows and
Macintosh OS 8.5.1 to 9.x) or
Envelope #10
(Macintosh OS X).
Load the printable
side up and the flap
side down
To Next Page
Loading...
Need help?
General