8 9
TM-U220A
Specification
(For Argentina Fiscal)
3) Vibration resistance
While packed: Frequency 5 to 55 Hz
Acceleration Approximately 19.6 m/s
2
{2G}
Sweep 10 minutes (half cycle)
Time One hour
Directions X, Y, and Z
4) Impact resistance
While packed: Packaging Epson's standard packaging
Height 60 cm {2 feet}
Directions 1 corner, 3 edges, 6 sides
While not packed: Height 5 cm {2"}
Directions 4 sides, supported on one side
5) Acoustic noise
Operating (bystander positions): Approximately 64 dB
NOTE: The above values are measured while the Epson evaluation printing pattern is printed.
The acoustic noise varies depending on the paper used, printing contents, or the setting
values such as print speed or print density.
1.14 Printer Installation Position
Install the printer horizontally as a basic position. The printer also must be installed so that it does not
move or vibrate during paper cutting or the drawer kick-out operation. An optional magic tape is
available to fix the printer.
To Next Page
Loading...
Need help?
General