14 13
3. FUNCTIONS
3.1 Commands
3.1.1 List of commands for all printer models
Command Name
HT
Horizontal tab
LF
Print and line feed
CR
Print and carriage return
DLE EOT
Transmit real-time status
DLE ENQ
Transmit real-time request to printer
DLE DC4
Generate pulse in real time
ESC SP
Set right-side character spacing
ESC !
Select print mode(s)
ESC %
Select/cancel user-defined character set
ESC &
Define user-defined characters
ESC ∗
Select bit-image mode
ESC −
Turn underline mode on/off
ESC 2
Select default line spacing
ESC 3
Set line spacing
ESC <
Return home
ESC =
Select peripheral device
ESC ?
Cancel user-defined character
ESC @
Initialize printer
ESC D
Set horizontal tab positions
ESC E
Turn emphasized mode on/off
ESC G
Turn double-strike mode on/off
ESC J
Feed paper and printing
ESC K
Print and reverse feed
ESC M
Select character font
ESC R
Select an international character set
ESC U
Turn unidirectional printing mode on/off
ESC a
Select justification
ESC c 4
Select paper sensor(s) to stop printing
ESC c 5
Enable/disable panel buttons
ESC d
Print and feed n lines
ESC e
Print and reverse feed n lines
ESC p
Generate pulse
ESC t
Select character code table
ESC {
Turn upside-down printing mode on/off
FS p
Print NV bit image
FS q
Define NV bit image
GS ( A
Execute test print
To Next Page
Loading...
Need help?
General