Epson VS230 Operation Guide

Note: If the virtual display driver has been enabled so that the mouse pointer can be moved outside the
limits of the screen, there may be occasions when you lose track of the location of the pointer. If you are
not using a virtual display, clear the virtual display checkbox on the Add-Remove Virtual Display screen
so that the mouse pointer moves back inside the screen's display area. To subsequently use multi-
screen display function again, place a check mark next to the required display on the Add-Remove
Virtual Display screen.
Parent topic: Setting Up Multi-Screen Display
Arranging the Multi-Screen Display (Windows)
You can arrange the position of each display. If you are using a virtual display, enable the virtual display
before arranging the multi-display.
1. If you use an external display, connect it to the computer.
2. Check the following items when connecting over a wireless LAN and modify the settings as
necessary. If the following items are not set correctly, the multi-screen display function cannot be
used.
• The SSID for the computer and each projector must be the same. (For Quick Connection Mode)
• The wireless LAN system for the computer and each projector must be the same.
3. Click Start, select Programs (or All Programs), EPSON Projector, EasyMP Network Projection,
and then click EasyMP Network Projection V2.XX to start EasyMP Network Projection.
4. Select Quick Connection Mode or Advanced Connection Mode, and then click OK.
Note: When you connect to multiple projectors to project different images from each projector, select
Advanced Connection Mode.
55

Epson VS230 Specifications

General

Matrix type	3-panel (p-Si TFT active)
Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	0.75 - 8.89 m
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	30 - 350 \
Projection distance (tele)	8.89 - 8.89 m
Projection distance (wide)	0.75 - 0.75 m
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Focus	Manual
Throw ratio	1.45 - 1.96:1
Focal length range	16.77 - 16.77 mm
Aperture range (F-F)	1.44 - 1.44
Lamp type	UHE
Lamp power	200 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
Full HD	No
HD-Ready	Yes
Video processing	10 bit
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA)
USB 2.0 ports quantity	2
Component video (YPbPr/YCbCr) in	0
HDCP	-
Noise level	37 dB
Noise level (economic mode)	29 dB
RMS rated power	2 W
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	Black, White
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	283 W
Power consumption (economy mode)	207 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth	228.6 mm
Width	294.64 mm
Height	76.2 mm
Weight	2313.32 g