Epson VS230 Operation Guide

Error Messages List
When an error occurs, an error message is displayed on your computer screen. Check for your message
and follow the instructions here to clear the error.
Error Messages when Starting up EasyMP Network Projection
Error Messages when Searching for and Selecting Projectors
Error Messages when Projecting
Parent topic: Solving Problems
Error Messages when Starting up EasyMP Network Projection
Error Messages Remedy
Cannot start this application while USB Display is Close USB Display and then start EasyMP
running. Network Projection.
Do one of the following to close USB Display:
• Windows: Discconnect the USB cable from the
projector.
• Mac OS X: Select Disconnect from the USB
Display icon menu on the menu bar or Dock,
and then remove the USB cable.
Cannot start this application while Quick Wireless Close Quick Wireless Connection and then start
Connection is running. EasyMP Network Projection.
To close Quick Wireless Connection, perform
External Device Removal from the icon on the
task bar to remove the Quick Wireless Connection
USB Key from the computer.
EasyMP Network Projection initialization failed. Restart EasyMP Network Projection. If the
message is still displayed, uninstall and then
reinstall EasyMP Network Projection.
75

Epson VS230 Specifications

General

Matrix type	3-panel (p-Si TFT active)
Number of colors	1.073 billion colors
Native aspect ratio	4:3
Projection distance	0.75 - 8.89 m
Projection technology	3LCD
Contrast ratio (typical)	10000:1
Screen size compatibility	30 - 350 \
Projection distance (tele)	8.89 - 8.89 m
Projection distance (wide)	0.75 - 0.75 m
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Focus	Manual
Throw ratio	1.45 - 1.96:1
Focal length range	16.77 - 16.77 mm
Aperture range (F-F)	1.44 - 1.44
Lamp type	UHE
Lamp power	200 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
Full HD	No
HD-Ready	Yes
Video processing	10 bit
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA)
USB 2.0 ports quantity	2
Component video (YPbPr/YCbCr) in	0
HDCP	-
Noise level	37 dB
Noise level (economic mode)	29 dB
RMS rated power	2 W
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	Black, White
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	283 W
Power consumption (economy mode)	207 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth	228.6 mm
Width	294.64 mm
Height	76.2 mm
Weight	2313.32 g