Epygi QX200 User Manual

Configuring QX IP PBXs with Flowroute
Revision 1.0 9 26-Sep-16
1.1 Modifying Caller ID for Outbound Calls
The Flowroute allows the outbound Caller ID to be modified. In the outgoing SIP Invite message Flowroute
needs to see a known number in the P-Preferred field using the globalized E.164 format (+1 and 10 digits) in
order for outbound calls to be allowed, recognized and called back. Epygi does support this and it is doable in
the call routing entry for outgoing calls as follows:
1. Go to TelephonyCall Routing page, select the outgoing Call Routing entry *1 and press the Edit
button. The Call Routing Wizard appears.
 Enable the Filter on Source/Modify Caller ID option and press Next.
Figure 7: Call Routing Wizard page
2. On the second page deselect the Use Extension Setting field, fill-in the Username and Password fields
with information from Flowroute and press Next (Figure 8).

Epygi QX200 Specifications

General

Brand	Epygi
Model	QX200
Category	Network Hardware
Language	English