10
Settings & Preferences
Spec FR1
The Spec FR1 meter mode (FR1 = Front and Rear
signal strengths of 1 signal) displays the numeric
frequency and band of the highest priority threat
along with a front and rear bar graph of its signal
strength. The left bar graph shows the signal in
front of the detector while the right bar graph
shows the signal strength from the rear. If there
are multiple alerts present, only the signal
strength of the highest priority threat is displayed.
Laser is the highest priority threat, followed by Ka,
K, then X band radar. The number in between the
bar graphs is the total number of alerts that are
being detected.
Spec FR2
The Spec FR2 meter mode (FR2 = Front and Rear
signal strengths of 2 signals) displays the numeric
frequency of the highest priority threat and the
bands of the two highest priority threats along
with a front and rear bar graph of their signal
strengths. The left bar graph shows the signal in
front of the detector while the right bar graph
shows the signal strength from the rear. When
using this meter mode the rear signal strength bar
graph is always the opposite color of the selected
display color. For instance, if blue is the display
color, then the rear bar graph will be red. If there
are multiple alerts present, only the signal
strength of the two highest priority threats are
displayed. Laser is the highest priority threat,
followed by Ka, K, then X band radar. The number
in between the bar graphs is the total number of
alerts that are being detected.
Expert FR
Expert FR meter mode (FR = Front and Rear signal
strengths) simultaneously tracks up to four radar
alerts displaying each alert’s band along with a
bar graph of their front and rear signal strengths.
When using this meter mode the rear signal
strength bar graph is always the opposite color of
the selected display color. In the above image, a
Ka band, two K bands, and an X band signal are
being detected. The X band alert is grey to show
that it is a locked out false alert. For more
information about locking out false alerts see the
GPS Filtering/TrueLock section. Expert FR meter
mode can help you spot a change in your normal
driving environment (e.g., a trac radar unit being
operated in an area where there are normally
other signals present).
Simple
Simple messages replace actual bands and signal
strengths or frequencies. “Caution” is used when
an alert is received while you are traveling below
your current Cruise Alert setting (or posted speed
limit for your current location when connected to
ESCORT Live). “Slow Down” is displayed when an
alert is received while you are traveling above the
current Cruise Alert setting (or posted speed limit
of your current location, when connected to
ESCORT Live).
To Next Page
Loading...