Escort MAX Ci 360 User Manual (English)

To Next Page

To Previous Page

GPS Filter/TrueLock continued

Locking Out False Alerts

To manually lock out a xed location false alert

(X band, K band or laser only), press the MUTE

button three times during an alert. Pressing the

rst time will silence the audio. Pressing a second

time will generate a prompt on the display that

will read “Lockout?” Press a third time to conrm

you want to lock this signal out by location and

frequency. A “Stored” message will be displayed.

Once a signal has been stored, ESCORT MAX Ci 360

will not audibly alert the next time you approach

this area but will display the locked-out alert in grey.

To unlock a signal that has already been stored,

simply press the MUTE button twice while

receiving the locked out alert. The display will

read “Unlock?” when pressing MUTE the rst time.

Press the MUTE button again to unlock it from

memory. The display will read “Unlocked” to

conrm your action.

Note: When the GPS Filter is set to OFF, you do not

have access to ESCORT MAX Ci 360’s other GPS-

enabled features (e.g., Defender Database alerts,

marking locations, etc.).

AutoPower

This feature automatically turns o ESCORT MAX Ci

360 after a set period of time to save unnecessary

drain on your battery. This is especially useful if

your vehicle has a constant-power ignition. To

turn ESCORT MAX Ci 360 on again you must press

the power button.

Note: If AutoPower is on, to save screen life the

display screen goes blank after 30 minutes without

moving. The display screen will turn on automatically

after you reach 10MPH.

Settings & Preferences

Locked Out Alert

Band Enables

In the factory default setting the suggested radar

and laser bands for North America are monitored

and sources of some common false alerts are

rejected. It is highly recommended that you use

your ESCORT MAX Ci 360 in this mode.

If you modify Band Enables then this setting will

show Modied. The ESCORT MAX Ci 360 will also

notify you during the startup sequence with an

audible alert, and associated text message stating

which bands have changed from the factory

default settings.

WARNING: Do not turn o any bands unless you are

absolutely certain there are no trac radar guns

using that specic band in your area.

Shifters

ESCORT MAX Ci 360 is equipped with a total of

four (2 front, 2 rear) Laser ShifterMax sensors.

These highly sensitive laser transceivers will detect

a laser signal and, when Shifting is enabled, will

respond (or transmit) a pulsed signal back in order

to “Shift” or confuse the targeting laser gun.

The MUTE button can be used to manually shut o

Laser Shifting once you have checked your speed.

Since some laser guns provide “jamming” codes

for the ocer, this can be useful to avoid any

undue attention. Simply press the MUTE button

twice during a laser alert. All Shifters will cease to

transmit and the display will change from “Shifting”

to “Laser”. “Laser” indicates that you are receiving

a laser alert in “Receive Only” mode.

The Shifters will remain in the “Receive Only”

mode for approximately sixty seconds, giving you

time to pass the speed trap. Once this time has

expired a double beep tone will be given, indicating

that the Shifters are now back in “Shifting” mode.

Other manuals for Escort MAX Ci 360

Installation Manual7 pages

Need help?

Do you have a question about the Escort MAX Ci 360 and is the answer not in the manual?

Escort MAX Ci 360 Specifications

General

Laser Detection	Yes
360° Protection	Yes
GPS Technology	Yes
Connectivity	Bluetooth
Voice Alerts	Yes
Directional Arrows	Yes
Speed Camera Database	Yes
Installation	Professional installation recommended
Radar Bands Supported	X, K, Ka
False Alert Filtering	Yes
Display Type	OLED
Smartphone App	Escort Live
Compatibility	iOS and Android