-
+
-
+
-
+
English
16 EN
Use the “+” (30) and “-” (31) keys to adjust the clock.
The time increases (or decreases) one minute each time
the key is pressed.
If one of the keys (
30 or 31) is pressed and held down
for more than 10 seconds, the minutes setting stops and
the hours setting increases (or decreases).
During the time setting phase, the seconds remain at "00".
17. Clock adjustment
Language selection
18. Customer parameters menu
To access "Customer parameters" press key (34); the
following message will appear on the display:
To display the messages in a different language from that
set, after entering into Programming mode, position the
cursor on the desired language by pressing the
“+” (30)
and
“-” (31) keys and then pressing the “PRG” key
(29). The machine will restart with the messages provided
in the selected language.
The display (14) provides a choice of the following
languages.:
Italian, English, French, German, Dutch, Spanish,
Portuguese, Japanese and Russian.
11 October 2013
15:40:51
À
CUSTOMER PARAMETERS
SERVICE TIME
À
CUSTOMER PARAMETERS
ENGLISH
02_EmblemaR_1442.indd 16 21/10/2014 09:41:33
To Next Page
Loading...
Need help?
General
