38 Using Insight Software DATAPAQ TP3
Installation
Ensure you are logged into Windows in Administrator mode.
For most systems, installation will start automatically on placing the Insight DVD
in the drive. (If installation does not start, click the Windows Start button and
select Run; browse to your DVD drive, and run Setup.exe.) As part of the
installation, you can choose PDFs of Datapaq user documentation to be copied
to your PC for rapid on-demand viewing through Insight.
Follow the on-screen instructions. You will need your license number to hand,
which is to be found on:
• Your license agreement.
• The outside of the DVD case.
• The outside of the system packaging.
Insight’s link with the logger must also be made while Windows is in Admin-
istrator mode, and it is thus best to do this now, as part of the Insight installation:
connect the logger to the PC and follow the procedure under ‘Communications
Setup’ (below). Once this has been done, an operator will be able to use Insight
with the logger connected to the PC without being in Administrator mode.
Upgrading
It is not necessary to remove an existing version of the software before
installing a new one. Settings and data files used with the current installation will
be maintained.
Removal
Use the standard procedure for your Windows version, e.g.
• In Windows 7 – Start button > Control Panel > Programs and Features, and
double-click Datapaq Insight.
• In Windows 10 – Start button > Settings > System > Apps & features, and
click Datapaq Insight.
Help System
Full details on using the Insight software are contained entirely within its online
Help system: access this by clicking Help, and then Contents, on Insight’s main
menu. Then, within Help, click on Contents headings and topics to expand and
read them.
To Next Page
Loading...
Need help?
General
