Maximum EIRP 43
B Additional Notes
Maximum EIRP
The transmit EIRP is the sum of the conductive transmit power, IEEE Std 802.11n multiple
stream effect, and the antenna gain. By default, Fortinet AP832 EIRP is set lower than the reg-
ulatory limit with the default antenna.
Dual Concurrent Same Band Operation
With grant of additional regulatory approval and Permit-but-Ask, users may configure two
radios in AP832 on the same band (i.e., both radios are on the 2.4 GHz but in the different or
same channels, and both radios are on the 5.x GHz but in the different or same channels).
However, user shall expect performance deterioration due to RF collision and collocation inter-
ference. It is important that users adopt external antennas, with extended coaxial pigtail
cables, with AP832e in such use case. User shall place antennas far apart to reduce interfer-
ence. Meanwhile, user shall also reduce AP832e transmit power, for each radio, by at-least 3
dBm from its default setting.
Manufacturing Information
The AP832 models are built in China. Contact Fortinet for manufacturing related information.
Distributed Antenna Systems (DAS)
Fortinet does not certify or endorse any specific Distributed Antenna System (DAS) vendors.
Fortinet will provide support to Fortinet Wi-Fi customers that use distributed antennas within
the terms and conditions of the MeruAssure Terms of Service and in accordance with the cus-
tomer's support agreement. Fortinet Customer Support will support Fortinet software and
hardware, and will work jointly with DAS vendors to identify and troubleshoot issues, but any
To Next Page
Loading...
Need help?
General
