EasyManuals Logo
Home>Fortinet>Wireless Access Point>AP832

Fortinet AP832 User Manual

Fortinet AP832
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
Air Handling Space Requirements44
support related to RF issues, including RF coverage, shall be the responsibility of the DAS
vendor.
Fortinet recommends that customers use only a DAS that has been tested to work with Forti-
net hardware and software. Fortinet does not provide any site surveys, design or implementa-
tion of Wi-Fi over DAS. Fortinet recommends that customers obtain such services from a
trained and qualified systems integrator or from their DAS vendor.
Air Handling Space Requirements
When installing APs in an air-handling space, as described in Article 300.22(C) of the National
Electric Code® (2008 edition, pages 70-135 and 70-136), the unit should only be powered by
the Ethernet port (PoE), not by the AC-powered power supply.
Only AP832e with plastic façade removed can be applied in air-handling space.
When the product is installed in air-handling spaces, the cables employed should be suitable
under NEC Articles 300.22 and 725 and marked accordingly, for use in plenums and air-han-
dling spaces with regard to smoke propagation, such as CL2-P, CL3-P, MPP or CMP.
The products should be installed in accordance with all applicable, local regulations and prac-
tices. Compliance applies only when the plastic facade is removed from the AP.
Frequencies Blocked for Regulatory
Compliance
These products are for indoor use only, in U-NII-1 and/or U-NII-3 band when Dynamic Fre-
quency Selection, DFS, from 5.25-5.35 GHz and 5.47-5.725 GHz, is disabled. With DFS
approval, these products can operate in U-NII-2 or U-NII-2e. To ensure compliance with local
regulations, be sure to set your Access Point to the country in which you are using the Access
Point.
Underwriters Laboratories
Use only listed e information technology equipment (ITE) I.T.E. equipment.
The unit is intended for installation in Environment A as defined in IEEE 802.3.af.All intercon-
nected equipments must be contained within the same building, including the interconnected
equipment's associated LAN connection.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fortinet AP832 and is the answer not in the manual?

Fortinet AP832 Specifications

General IconGeneral
BrandFortinet
ModelAP832
CategoryWireless Access Point
LanguageEnglish

Related product manuals