For the location of the safety and danger notices on the device, refer to the section
headed "General remarks" in the Operating Instructions for the device.
Any equipment malfunctions which might impair safety must be remedied before the
device is turned on.
This is for your personal safety!
Environmental
conditions
Operation or storage of the device outside the stipulated area will be deemed as not in
accordance with the intended purpose. The manufacturer accepts no liability for any
damage resulting from improper use.
Qualified person-
nel
The servicing information contained in these operating instructions is intended only for
the use of qualified service engineers. An electric shock can be fatal. Do not carry out
any actions other than those described in the documentation. This also applies to quali-
fied personnel.
All cables and leads must be secured, undamaged, insulated and adequately dimen-
sioned. Loose connections, scorched, damaged or inadequately dimensioned cables and
leads must be immediately repaired by authorised personnel.
Maintenance and repair work must only be carried out by an authorised specialist.
It is impossible to guarantee that bought-in parts are designed and manufactured to meet
the demands made on them, or that they satisfy safety requirements. Use only original
spare parts (also applies to standard parts).
Do not carry out any alterations, installations, or modifications to the device without first
obtaining the manufacturer's permission.
Components that are not in perfect condition must be changed immediately.
Copyright Copyright of these operating instructions remains with the manufacturer.
The text and illustrations are all technically correct at the time of printing. We reserve the
right to make changes. The contents of the operating instructions shall not provide the
basis for any claims whatsoever on the part of the purchaser. If you have any sugges-
tions for improvement, or can point out any mistakes that you have found in the instruc-
tions, we will be most grateful for your comments.
Data protection The user is responsible for the safekeeping of any changes made to the factory settings.
The manufacturer accepts no liability for any deleted personal settings.
Intended use The Fronius Smart Meter TS is a fixed piece of equipment for public grids of TN/TT sys-
tems and records self-consumption and/or individual loads in the system. The Fronius
Smart Meter TS is required for systems with a battery storage system and/or a Fronius
Ohmpilot installed for communication between the individual components. The installa-
tion is carried out on an indoor DIN rail with corresponding back-up fuses, which are
adapted to the cable cross-sections of the copper conductors and to the maximum cur-
rent of the meter. The Fronius Smart Meter TS must only be operated in accordance with
the specifications in the enclosed documentation and in accordance with local laws, reg-
ulations, provisions, standards and within the limits of technical possibilities. Any use of
8
To Next Page
Loading...
Need help?
General
