Fuji Electric FRENIC-Lift LM2C Series User Manual

1-2
-
Code
FRN
Code
Code Power supply
0010 4E Three-phase 400V
0015
0019
0025 Code
Model type
0032 C C type
Code
Development code
2 2
Code
Applicable area
LM
Elevating machinery
Output rated current
32.0A
E
10.0A
15.0A
18.5A
24.5A
LM
2
C
4
Series name
FRENIC series
FRN
0019
In this manual, inverter types are denoted as "FRN_ _ _LM2C- _." The boxes  replace alphabetic
letters depending on the shipping destination
.
If you suspect the product is not working properly or if you have any questions about your product, contact your
Fuji Electric representative.
1.2 Precautions for Using Inverters
When handling inverters, be sure to observe the wiring precautions given below.
(1) The maximum wiring distance between an inverter and a motor
The maximum wiring is 20m.
When using wire longer than the specification, that may not be able to control a motor.
If longer secondary wiring is required, consult your Fuji Electric representative.
Motor
Inverter
Power
input
Max. 20 m

Fuji Electric FRENIC-Lift LM2C Series Specifications

General

Brand	Fuji Electric
Model	FRENIC-Lift LM2C Series
Category	Inverter
Language	English