Instruction Manual
LM2A series
■Three-phase 400 V ： FRN0006LM2A-4□ to FRN0091LM2A-4□
■Single-phase 200 V ： FRN0011LM2A-7□/FRN0018LM2A-7□
Thank you for purchasing our FRENIC-Lift LM2A series of inverters.
• This product is designed to drive three-phase induction motors and three-phase permanent magnet
synchronous motors. Read through this manual to become familiar with the handling procedure and
correct use.
• Improper handling might result in incorrect operation, short life cycle, or failure of this product as well as
the motor.
• Deliver this manual to the end user of this product. Keep this manual in a safe place until this product is
discarded.
• For instructions on how to use an optional device, refer to the instruction and installation manuals for that
optional device.
To Next Page
Need help?
General
