Fuji Electric FRENIC-Lift LM2A Series User Manual

1-1
Chapter 1 BEFORE USE
1.1 Acceptance Inspection and Appearance of Product
Unpack the package and check the following:
(1) An inverter and the following accessories are contained in the package.
Instruction manual (this book)
Main circuit wiring connector
(2) The inverter has not been damaged during transportation—there should be no dents or parts missing.
(3) The inverter is the type you ordered. You can check the type and specifications on the main nameplate. (A
total of two nameplates and warning plates are attached to the inverter as shown below.)
(FRN0011LM2A-7□/FRN0018LM2A-7□)
(FRN0006LM2A-4□toFRN0019LM2A-4□)
(FRN0025LM2A-4□/FRN0032LM2A-4□)
(FRN0039LM2A-4□/FRN0045LM2A-4□)
Warning plate
Sub nameplate
Main nameplate
Warning plate
Sub nameplate
Main nameplate
Warning plate
Sub nameplate
Main nameplate
(FRN0060LM2A-4□toFRN0091LM2A-4□)
Warning plate
Sub nameplate
Main nameplate

Fuji Electric FRENIC-Lift LM2A Series Specifications

General

Brand	Fuji Electric
Model	FRENIC-Lift LM2A Series
Category	Inverter
Language	English