11-5
11.3.3 Leakage current of EMC-filter built-in type inverter and outboard EMC-complaint
filter
Table 11.1 Leakage current of EMC filter built-in type inverter
Leakage current (mA)
*2), *3)
Input
Power
Inverter type
*1)
normal worst
FRN0.1C1E-2
FRN0.2C1E-2
FRN0.4C1E-2
FRN0.75C1E-2
7.5 7.5
FRN1.5C1E-2
**
FRN2.2C1E-2
**
Three-
phase
200V
FRN3.7C1E-2
**
13.0 20.0
FRN0.4C1E-4
FRN0.75C1E-4
5.4 33.0
FRN1.5C1E-4
**
FRN2.2C1E-4
**
Three-
phase
400V
FRN3.7C1E-4
**
FRN4.0C1E-4
**
3.8 25.0
FRN0.1C1E-7
FRN0.2C1E-7
FRN0.4C1E-7
FRN0.75C1E-7
8.3 8.3
FRN1.5C1E-7
Single-
phase
200V
FRN2.2C1E-7
4.1 8.2
*1) - A box (
) in the above table replaces A, C, E, or J depending on the shipping destination.
- Asterisks (**) in the above table denote the following:
21: Braking resistor built-in type, None: Standard
*2) The values are calculated assuming the power supplies of 3-phase 240V (50Hz), 3-phase 400V
(50Hz), and 1-phase 230V (50Hz).
*3) The worst condition includes a phase loss in the supply line.
To Next Page
Loading...
Need help?
General
