3 Copy
138
Copy
3
îš„Off
Prints the text specified in [Stored Watermarks] as it is.
îš„Embossed
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as embossed text.
îš„Outline
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as outline text.
You can specify the size, density, and other settings for the text to be printed with Watermark in the
System Administration mode. For more information, refer to "5 Tools" > "Common Service Settings" >
"Watermark" in the Administrator Guide.
Secure Watermark (Managing Document Security)
Secure Watermark is a security management feature to embed a copy protection digital
code into a document, to restrict the document to be duplicated. The digital code
enables you to analyze "when", "from which machine", and "by whom" the document
was output.
Important • This feature is only supported on Fuji Xerox manufactured machines that are compatible to
Secure Watermark.
• The copy protection of a document, the analysis function of digital codes, and the restrictive
effect of hidden text using the Secure Watermark feature is not warranted to always function.
The feature may not function depending on the document or settings. For more information,
contact our Customer Support Center.
• We assume no responsibility for a damage caused by using or not being able to use the
Secure Watermark feature.
• Using the Secure Watermark feature may degrade print quality as follows:
• Colors may become darker.
• Text in documents may become hard to read.
• Dots such as decimal characters and periods may become hard to read.
• The Secure Watermark feature may not work properly for a document if its size is smaller
than A5, if its background color is not white, or if the Watermark or Secure Watermark
feature has already been used for the document.
• In some cases, a document may not be printed even if the Secure Watermark feature has
not been used for the document. This happens because the machine incorrectly detects a
copy protection code from the document. In that case, ask the system administrator to
temporarily disable [Secure Watermark Detection] for copy protection codes.
• If a layout template is specified in [Apply Layout Template to Copy/Print Jobs] under [Force
Annotation] in the System Administration mode, an embedded copy protection code is
overlapped with the text on the layout template. For information on [Force Annotation], refer
to "5 Tools" > "Common Service Settings" > "Force Annotation" in the Administrator Guide.
• Analyzing output paper allows the system administrator to grasp the identification
information of the user who requested the job. Note that we assume no responsibility for a
privacy issue of the user caused by using the Secure Watermark feature.
• If you use the Secure Watermark feature to a document that a protection code of the Secure
Watermark feature (including the Copy Management Expansion Kit (optional)) has already
been embedded, the copy protection of a document, the analysis function of digital codes,
and the restrictive effect of hidden text will be ineffective.
• When [Secure Watermark Detection] is set to [On], it takes longer time for the first page of a
document to be copied than usual as the machine detects a copy protection code.
• The following settings for the Secure Watermark Effect of the Secure Watermark Kit
(optional) are set to fixed and cannot be changed: print density, embedded text display
(outline), and the font size.
• The Watermark and Secure Watermark features cannot be used simultaneously.
To Next Page
Loading...
Need help?
General
