Accounting
321
Tools
5
Note • While a device for maintenance is connected, you cannot change the setting.
Accounting/Billing Device
Select the type of the accounting/billing device connected to the machine.
Important • If a device connected does not match the device selected in [Accounting/Billing Device], an error
occurs. Jobs related to the accounting/billing device cannot be performed until the error is resolved.
For information on how to resolve the error, refer to "Error Code" (P.494).
Track Print Jobs
This feature is effective for the Print service.
Select whether or not to track billing information for the print jobs. Select from [No Tracking]
and [Track with Accounting/Billing Device].
This feature is available for all accounting/billing devices.
Track Scan/Fax Jobs
This feature is effective for the Scan, Fax, Internet Fax, and Server Fax services.
Select whether or not to track billing information for the scan, fax, Internet fax, and server
fax jobs. Select from [No Tracking] and [Track with Accounting/Billing Device].
This feature is available for accounting/billing devices other than Coin Kit and Dispenser.
Interrupt Mode
This feature is effective for the Copy service.
Select whether or not to enable the Interrupt mode. Select from [Disabled] and [Enabled].
This feature is available for accounting/billing devices other than Card Activated -
Cumulative and Smart Card Reader.
Job with Insufficient Credit
This feature is effective for the Copy, Print, and Scan services.
Select the operation of the machine when the amount remaining in the accounting/billing
device becomes insufficient. Select from [Delete Job Immediately] and [Hold Job].
This feature is available for accounting/billing devices other than Card Activated -
Cumulative and Smart Card Reader.
Charge Print Jobs
This feature is effective for the Print service.
Select how the print job performed is charged. Select from [Charge by Card Number] and
[Do not Charge by Card Number].
This feature is available for Card Activated - Cumulative and Card Activated - Subtractive.
Track with Cumulative Device
This feature is effective for the Copy and Print services.
Select the timing that the amount for copy or print job is charged. Select from [Track with
Accounting Device] and [High Speed Printing].
This feature is available for Card Activated - Cumulative.
Scan Ahead for Copy Job
This feature is effective for the Copy service.
Select whether or not to enable the Scan Ahead feature for copy jobs. Select from [Disabled]
and [Enabled].
To Next Page
Loading...
Need help?
General
