19
Using the Camera
2
18
ＳＥＬＦ−ＴＩＭＥＲ
ＯＦＦ
ＳＥＬＦ−ＴＩＭＥＲ
ＯＦＦ
ＴＲＩＭＭＩＮＧ
ＴＲＩＭＭＩＮＧ
Photography: d button Turns Macro ( ) on and off.
c button Sets the Flash ( ).
Playback: Change frame or movie frame advance.
0 Photo mode “ ” button
0 Zoom button
Photography: Press “ T ” to zoom in (telephoto).
Press “ W ” to zoom out (wide-angle).
Playback: Press “ T ” to enlarge the image.
Press “ W ” to revert to normal display.
Photography: Select the quality mode,
sensitivity and FinePix COLOR
settings.
Playback: Specify the print order
(DPOF) settings.
0
g button
0 BACK (DISP) button
BACK: Press this button to stop a procedure midway through.
DISP: Press this button to select the LCD monitor display.
1Display the menu.
Press the “MENU/OK” button.
4Confirm the setting.
Press the “MENU/OK” button.
2Select a menu option.
Press the left or right arrow on the 4-
direction button.
3Select a setting.
Press the up or down arrow on the
4-direction button.
0
Using the Menus
Instructions for the next step in the procedure appear
at the bottom of the LCD monitor. Press the button
indicated.
For example, to trim the image as shown in the figure
at right, press the “MENU/OK” button.
Up, down, left and right are indicated by black triangles in the Owner’s Manual. Up or down is shown
as “a” or “b”, and left or right is shown as “d” or “c”.
◆ Displaying the on-screen help ◆
This section describes the camera’s functions.
Changing between the “ ” Photography
mode and the “ ” Playback mode.
With the “ ” button held down, press “d” or
“c” to select the exposure compensation.
Auto
Scene position
Portrait
Landscape
Sports
Night scene
Movie
Manual
Aperture-priority Auto
Shutter-priority Auto
Programmed Auto
0 Mode switch
0 Photography mode selector
Still photography
Movie recording
Turn the Mode dial to select the photography mode.
0 Flash pop-up button
To use the flash, press the flash pop-up button
to release the flash.
0
Exposure compensation button
BASIC OPERATION GUIDE
2
Using
the Camera
To Next Page
Loading...
Need help?
General
