73
Advanced Features
3
72
ＤＰＯＦ ＡＬＬ ＲＥＳＥＴＤＰＯＦ ＡＬＬ ＲＥＳＥＴ
ＳＥＴＳＥＴ
1
1Set the Mode switch to “w”.
2Press the “p” button.
01 02
2
1Press “d” or “c” to select “U” DPOF ALL RESET.
2Press the “MENU/OK” button.
3
A message appears.
To reset all the DPOF settings, press the
“MENU/OK” button.
01 02
ＹＥＳＹＥＳ
ＲＥＳＥＴ ＤＰＯＦ ＯＫ？ＲＥＳＥＴ ＤＰＯＦ ＯＫ？
ＣＡＮＣＥＬＣＡＮＣＥＬ
U DPOF ALL RESET
p PHOTO MODE PLAYBACK
Total number of print
１００−０００９１００−０００９
ＴＯＴＡＬＴＯＴＡＬ／ ９／ ９ＳＨＥＥＴＳＳＨＥＥＴＳ
ＤＰＯＦＤＰＯＦ
１００−０００９１００−０００９
ＤＰＯＦ：００００９ＤＰＯＦ：００００９
０１０１ ＳＨＥＥＴＳＳＨＥＥＴＳ
ＳＥＴＳＥＴ
ＦＲＡＭＥＦＲＡＭＥ
4
1Press “d” or “c” to display the frame (file) for
specifying DPOF settings.
2Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1
and 2.
●
!
Prints of up to 999 image frames (files) can be ordered on the
same xD-Picture Card.
●
!
DPOF settings cannot be specified for movie and CCD-RAW.
5
Always press the “MENU/OK” button after the
settings are completed.
Pressing the “BACK (DISP)” button cancels those
settings.
Pressing the “BACK(DISP)” button while choosing
settings will cancel all current settings. If there were
previous DPOF settings, only the modifications are
cancelled.
01 02
◆
Canceling a frame
◆
To cancel the DPOF setting for a frame (file) you
have specified (cancel frame), perform steps
1 to 3
and then:
1Press “d” or “c” to select the frame (file) with
the DPOF setting you want to cancel.
2Set the number of prints to 0(zero).
To cancel the DPOF setting for another frame (file),
repeat steps 1 and 2.
Press the “MENU/OK” button to complete the
settings.
Total number of prints
Setting for that frame
u DPOF SET FRAME
p PHOTO MODE PLAYBACK
To Next Page
Loading...
Need help?
General
