Name: Fujitsu ABYG36KRTA
Brand: Fujitsu
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2-28. E: 95. Compressor motor control error (Outdoor unit)

Indicator

Wired remote

controller

Error code E: 95

Detective actuator Outdoor unit

Main PCB "Protection stop by "overcurrent generation at inverter

compressor starting" restart" generated consecutively 10

times x 3 sets (total 30 times)

Compressor

Forecast of cause

Defective connection of electric components

Main PCB failure

Compressor failure

Check point 1. Check Noise from Compressor

Turn on Power and check operation noise.

→ If an abnormal noise show, replace compres-

sor.

↓

Check point 2. Check connection of around the compressor components

For compressor terminal, main PCB

• Check if connector is removed.

• Check erroneous connection.

• Check if cable is open. (Refer to inverter compressor in "Service parts information" on page 03-

49.)

→ Upon correcting the removed connector or mis-wiring, reset the power.

↓

Check point 3. Replace main PCB

If Check point 1, 2 do not improve the symptom, change main PCB.

↓

Check point 4. Replace compressor

If Check point 3 do not improve the symptom, change compressor.

↓

End

2-28. E: 95. Compressor motor control error (Outdoor unit) - (03-33) - 2. Troubleshooting with error code

TROUBLESHOOTING

Questions and Answers:

Need help?

Do you have a question about the Fujitsu ABYG36KRTA and is the answer not in the manual?

Fujitsu ABYG36KRTA Specifications

General