-
01 - 03
-
WALL MOUNTED TYPE
AS
G09-14LT
WALL MOUNTED TYPE
AS
G09-14LT
High energy saving
High COP is realized by using Large heat exchanger, DC rotary compressor, and inverter
technology.
Energy saving control
Human sensor catches movements of people in a room, and operates with lower capacity when the room
is empty. When people come back to the room, it automatically returns to previous operating mode.
Energy saving operation by detecting someone’s movement
Human
sensor
10°C HEAT Operation
*Only available with Wireless RC.
The room temperature can be set to go no lower than 10°C,
thus ensuring that the room does not get too cold when not occupied
Caution)
When the room temperature is higher than 10°C, “ • 10°C HEAT” operation does not start. Operation starts and maintains the room
temperature at 10°C when the temperature drops below 10°C.
When “ • 10°C HEAT” operation stops, the room set temperature quickly returns to the preset temperature.
Outdoor unit low noise
*Only available with Wireless RC.
When air-conditioner operates in large capacity, operation noise of outdoor unit will be suppressed. In case
of room temperature being close to setting temperature, operation noise might not decrease.
Rated
noise level
3
dB
Down
Low noise
mode
Economy operation
Example : Cooling operation
5.0
4.0
3.0
2.0
1.0
0.0
Heating efficiency (COP)
09
Class
12
Class
14
Class
4.85
4.40
3.91
4.27
4.12
LT series
LE series
14%up!
7%up!
10
°C
20
°C
“10°C HEAT”
Button ON
Indoor unit
operation START
Economy operation is energy saving, as the set •
temperature of indoor unit is shifted by 1°C and
the maximum electric value of the outdoor unit is
suppressed.
Temp.
Economy operation
Shift
setting
temp
Control maxmum current
Nomal operation
Time
Set temperature
To Next Page
Loading...
Need help?
General
