6. SYSTEM DESIGN
MOUNTING POSITION1-4.
OUTDOOR UNIT

For the air conditioner to operate satisfactorily, install it as outlined in installation manual.
Outdoor unit mounting position

A position where satisfies the mounting space described in “3-3 Installation space".
A position where the unit can be installed horizontally.îž”
A position with enough space for performing pipe work, service and maintenance.îž”
Outdoor unit mounting limitation

A position that is not exposed to strong or seasonal winds.îž”
A position where the blown air does not accumulate.îž”
A position where there are no obstructions to the air near the inlet and outlet.îž”
A position not exposed to radiation from other heat sources.îž”
A position where the discharge air will not affect animals or plants.îž”
A position where the noise and hot air will not disturb the neighbour.îž”
A position with strong installation fixings, which can sufficiently bear the product weight.îž”
A position that does not transmit noise or vibration.îž”
A position where drain water discharge is not a problem.îž”
A position where snow does not accumulate.îž”
A position not easily affected by electrical noise.îž”
A position out of reach of children.îž”
A position where there is no danger of the generation, influx or accumulation of flammable gas.îž”
A position that does not have a special environment such as large amounts of oil, vapor or îž”
sulfide gas.
- (06 - 09) -
SYSTEM
DESIGN
SYSTEM
DESIGN
To Next Page
Loading...
Need help?
General
