Fujitsu AUYG18LVLB User Manual

6. SYSTEM DESIGN
AR-RAH2E / AR-RAH1E5-3-1.
SWITCHING SELECTION OF FUNCTION SETTING MODE

(2) Press and hold the “FAN” and the “ SET TEMP.
p
” buttons. While holding these 2 buttons,
press the "RESET" button.
SET TEMP. ( )
RESET
FAN
Function setting
mode display
SELECTION AND CONFIRMATION OF CUSTOM CODE

(3) Press the “ SET TEMP.
p
” or “ SET
T E M P.
q
” buttons to select the signal code
that matches the setting with the indoor
unit. By selecting the appropriate signal
code, the communication between the
indoor unit and the wireless RC becomes
possible.
CUSTOM CODE
(
--
-
)
The initial setting is " "
(4) Press the “TIMER MODE" button to send
the code to the indoor unit.
Pi Pi
- (06 - 58) -
SYSTEM DESIGN SYSTEM DESIGN

Fujitsu AUYG18LVLB Specifications

General

Brand	Fujitsu
Model	AUYG18LVLB
Category	Air Conditioner
Language	English