To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if my Fujitsu B24-8T Monitor says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, first, ensure the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
Why is my Fujitsu Monitor screen black but the power light is on?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, try the following: * Ensure that the computer is switched on. * Verify the monitor's data cable is correctly attached to the computer. * Press any key on the keyboard in case the computer is in power saving mode. * Adjust the brightness and/or contrast settings.
How to fix a Fujitsu B24-8T Monitor when there is no screen display and the power indicator is off?
If your Fujitsu Monitor screen is not displaying anything and the power indicator is off, check that the monitor's power cable is correctly connected. Also, ensure that the computer is switched on.
General| Screen Size | 23.8 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| VESA Mount Compatible | Yes (100 x 100 mm) |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Color Support | 16.7 million colors |
| Resolution | 1920 x 1080 |
| Connectivity | DisplayPort, VGA |
| Built-in Speakers | Yes |
| Viewing Angle | 178° (H) / 178° (V) |
