Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• TFT display (Thin Film Transistor; active ma trix)
• minimal space requirement
s thanks to slim casing
• optimum ergonomic characteristics (totally distortion-free, excellent picture
definition and colour purity right into the co rners)
• high degree of brightne
ss and good contrast
• high resolution (1920 x 1080)
• presentation of u p to 1
6.7 million colours (in conjunction with an appropriate display adapter)
• automatic scanning of horizontal frequen cies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 56 to 76 Hz (absolutely flicker-free)
• digital screen contr
oller with micropro cessor for storing 46 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient opera
tion via integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI com
patibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device
for swivel arm or a similar accessory
• Plug&Play capability
• Digital video
inputs (DVI, DP or HDMI) with HDCP
• power management for reducing power consumption when the c omputer is not in use
• Compliance w
ith the recommendations accord ing to TCO 7. 0
• the monitor fulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operat
ing manual contains important information you require to start up and run your LCD monitor.
A graphics c
ard (display adapter) with V GA interface or a digital graphics card with DVI interface
and/or a vi
deo signal source with DP interface for a B24-8 TE Pro monitor or with an HDMI
interface
for a B24-8 TS Pro monitor is required to control the LCD monitor. The monitor
processe
s the data supplied to it by the graphics c ard . The graphics card or the associated
driver so
ftware is responsible for setting the modes (resolution and refresh rate).
When put
ting the monitor into operation for the first time, the screen display should be
optimal
ly adapted to the display adapter used and a d justed in acco rdance w ith y our
needs (s
ee chapter "
Changing the monitor settings", Page 19).
Target group
You don’t need to be an "expert" to perform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for the computer and in this man ual.
In the event of any problems, please contact your sales office or our Service Desk.
Fujitsu 5
To Next Page
Loading...
Need help?
General