Working with the notebook
Installing a module
1
► Place the m odule in
to the module bay so that the co ntacts enter first.
► Push the module into the module bay until you feel it locking into place.
Optical drive
Opticaldrive
This product co
ntains a light emitting diode, classified in accordance with IEC
8251:1993: LA
SER CLASS 1, and must therefore not be opened.
Handling d ata carriers
Handling
Observe the
following guidelines when ha ndling data carriers:
•Avoidtouc
hing the surface of a data carrier. Only han dle data carriers by their edges.
• Always store data carriers in their cases. This will protect the da ta carrier against
being covered in dust, scratched or damaged in any other way.
•Protecty
our data carriers against du st, m echanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high tempe ratures or humidity.
You may u
se both 8-cm and 12-cm data carriers in the optical drive.
When us
ing a data carrier of lesser quality, vibrations and reading errors may occur.
Fujitsu Technology Solutions 39
To Next Page
Loading...
Need help?
General