Working with the notebook
Connecting the notebook to the Port Replicator
If you connect the noteb ook to the P ort Replicator during operation, problem s can
occur. We recommend that you switch off the notebook beforehand.
The mains adapter must be connected to the Port Re plicator when the
notebook is connected to the Port Rep lica tor.
We recommend that the notebook is not ope rated with the LCD screen closed when
the notebook is conne cted to the Port Replicator. T he resulting overhea ting can
cause reduced performance a nd increased activity of the integrated fan.
PortReplic ato r
► Switch the notebook off.
► Remove the mains plug for the mains ad apter from the mains socket.
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
1
► Position the notebook so that it is in line w ith the back edge of the Port Rep licator.
► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.
Fujitsu Technology Solutions 53
To Next Page
Loading...
Need help?
General