Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystems ettings,BIOSSe tup UtilityConfiguration, B IOSSetupU tilitySetupSystemc onfigurationHardwareconfiguration
The BIOS S etup Utility allows you to set the s ystem functions and the hardware
configuration for the notebook.
When it is delivered, the notebook is set to factory default settings. You can
change these settings in BIOS Setu p Utility. Any cha nges yo u make take effect as
soon as yo u save and exit the BIOS Setup U tility.
The BIOS Setup Utility program contains the following menus:
About
Displays information relating to the BIOS, processor a nd notebook
System
Advanced system settings
Advanced
Configuration of various hardw are components, such as mo use , keyboard,
processor
Security
Password settin gs and security functions
Boot
Configuration of the start-up sequence
Exit
Exits the BI OS S etu p Utility
Starting the BIOS Setup Utility
► Reboot the note
book (switch off/on or reboot the operating system).
BIOSSetupUtility
► Press and hold function key
F2
.
► If a password
has been assigned, enter the pa ssword and press the Enter key.
If you have fo
rgotten the password, contact your system administrator
or contact o
ur customer service centre.
The BIOS Setup U tility starts.
Operating BIOS Setup Utility
BIOSSetupUtility
Press the
F1
key to display help on the operation of the BIOS Setup Utility. The description
of the individual settings is shown in the right-hand window of the B IOS Setu p Utility.
With the
F9
key you can load the default settings of the BIO S Setup Utility.
► Use the cursor keys
←
or
→
to select the menu you wish to access to m ake changes.
The menu is displayed on the screen.
► Select the op tion you want to change with the cursor keys
↑
or
↓
.
► Press th e Enter k ey.
► Press the
ESC
key to exit the selected menu.
► For future referen ce, make a note of the changes you have made (for example, in this manual).
Fujitsu Technology Solutions 79
To Next Page
Loading...
Need help?
General