Working with the notebook
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating syste m.
Access via UMTS
If you have ordered an integrated UM TS module with your system, you can enjoy the
best reception and maximum energy efficiency, without any disruptive cables or aerials.
The optional UMTS modu le is ready for use immediately.
If you have not ordered a UMTS module, you can purchase the accessories for UMTS reception
from specialised dealers or from your Fujitsu Technology Solutions dealer.
You will find information on e stab lish ing the connection with the UMTS network
in the documentation for the hardware used.
Your device can connect with the Internet via UMTS. To do this, use one of
the following types of connection:
• an integrated UM TS module (depending on your model variant)
• a USB dongle (a USB stick with your mobile phone provider ’s SIM card)
• a UMTS ExpressCard (to be inserted in the ExpressCard slot of your device)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. Yo u can use it to
establish a c onnection to a local network (LAN = Local Area Network).
2
1
► Connect the network cab le to the LAN
port of the no tebook (1).
► Connect the network cable to your
network connection (2).
Your n
etwork administrator can help you to configure and use the LAN connections.
The n
etwork ca ble is not included in the delivery scope. This type o f
cabl
e can be obtained from a specialist dea ler.
Fujitsu Technology Solutions 51
To Next Page
Loading...
Need help?
General