Connecting external devices
Connecting external devices
Always refer to the safety information provided in "Important note s", Page 13 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied w ith the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the steps below in order, whe n connecting or disconnecting
devices to your notebook:
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before c onnecting/disconn ecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the extern al device.
Some of the extern al devices require special drivers (see the o perating
system and external device documenta tion).
Connecting dev ices to the notebook
1. Turn off your no tebook and all external devices.
2. Unplug your not
ebook and all devices f rom the mains sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all power
cables into the mains sockets.
DevicesPer ipheralde
vices
Disconnecting devices from the no teb ook
1. Turn off your no tebook and all external devices.
2. Unplug your
notebook and all devices f rom the mains sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPer ipheraldevices
64 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General