Fujitsu R407C User Manual

2-3-6 NETWORK CONVERTOR
02-26
2. DIP- SW103 (5, 6, 7, 8) setting
Number of the connected indoor units
Number of
connected the
Indoor unit
OFF
OFF
OFF OFF
OFF OFF
OFF ON
OFF OFF
ON OFF
1
2
3
4
5
6
OFF
OFF
ON ON
OFF ON
OFF OFF
OFF ON
OFF ON
DIP-SW 103
5
6
7
8
Number of
connected the
Indoor unit
OFF
ON
ON OFF
OFF ON
ON ON
ON OFF
OFF OFF
7
8
9
10
11
12
ON
OFF
OFF ON
ON OFF
ON OFF
ON OFF
ON ON
DIP-SW 103
5
6
7
8
Number of
connected the
Indoor unit
ON
ON
OFF OFF
ON ON
OFF ON
ON ON
ON OFF
13
14
15
16
ON
ON
ON ON
DIP-SW 103
5
6
7
8
3. DIP SW 107 Setting
3-1 DIP SW 107-1 setting forbidden
Select the wired remote controller validity / invalidity
Wired remote controller
SW 107-2
OFF
ON
Wired remote controller
Invalidity
validity
( Factory setting)
( Factory setting)
Set the DIP-SW 103 (5, 6, 7, 8) according to number of the connected indoor units.
3-2 Wired remote controller validity / invalidity
SW 107-1 OFF
( Factory setting)
(1) Network convertor (UTR-YSSA)
1. Dip SW103 ( 1, 2, 3, 4) setting
Indoor unit model type and remote controller type
Indoor unit type
Heat pump of big multi type
Heat pump of single spilt type
Cooling only of single spilt type
Cooling only of big multi type
Cooling only of single spilt type
Wall mounted with wired RC
RC type
With weekly timer
With weekly timer
Without weekly timer
With weekly timer
With weekly timer
Without weekly timer
RC number
EZ-099DHSE-＊,EZ-000DHSE-＊,EZ-0001HSE-＊,
EZ-000GHSE-＊,EZ-00004HSE-＊,
EZ-00005HSE-＊,EZ-0015HSE-＊,EZ-0019HSE-＊
EZ-0994HSE-＊,EZ-000EHSE-＊
EZ-09503HSE-＊,EZ-0950DHSE-＊
EZ-099CWSE-＊,EZ-000AWSE-＊,EZ-0001WSE-＊,
EZ-000FWSE-＊,EZ-0012WSE-＊
EZ-09906WSE-＊,EZ-000FWSE-＊
EZ-095YWSE-＊
EZ-098VWSE-＊
OFF OFF
OFF OFF
Without weekly timer
Heat pump of single spilt type
DIP-SW103
1
2 3
4
OFF OFF
OFF ON
OFF OFF
ON OFF
ON
OFF
OFF OFF
ON OFF
OFF ON
ON OFF
ON OFF
ON ON
OFF OFF
Set Dip SW103 ( 1, 2, 3, 4) according to indoor unit type and remote
controller (packaged together with the unit) type. You can also set
DIP-SW103 (1, 2, 3, 4) using the remote controller number that is
shown on the rear surface of the remote controller.
Rear View
EZ-########-R
RC Number
Instead of using the remote controller that was packaged together
with the unit, a VRF type remote controller must be used to
connected to network.
( Factory setting)
Asterisks (＊) are used in place of variable characters.

Fujitsu R407C Specifications

General

Brand	Fujitsu
Model	R407C
Category	Air Conditioner
Language	English