4-1 TIMER CONTROL
There are three timer modes: "OFF TIMER", "ON TIMER" and
"WEEKLY TIMER" .
(1) Set the clock time when the unit is in the stop mode (only the
current time will be shown on the remote control unit display).
(2) While adjusting the current clock time, do not use other
remote control functions.
(3) Each time the TIMER button is pressed, the remote control
unit display will change in the order shown below:
Remote control button selected
OFF timer setting
1) OFF timer
When the timer mode is set to "OFF timer", operation automatically
stops when the set time has elapsed.
NON STOP
OFF
WEEKLY
ON
2) ON timer
When the timer mode is set to "ON TIMER" , operation automati-
cally starts when the set time has elapsed.
ON timer setting
3) WEEKLY timer
Use the weekly timer to set operating times for each day of the
week.
Weekly Timer Features
Set different operating times for each day of the week.
Set one or two operating spans (one or two ON times and one
or two OFF times) per day.
Set time to a resolution of 5 minutes.
OFF time can be carried over to the subsequent day.
Use the "DAY OFF" setting to cancel operation for any day of
the coming week (one-time cancellation).
ON
SET
MASTER
CONTROL
FAN
CONTROL
TIMER
MODE
TEMP./DAY
SET TIME
CLOCK ADJUST
START/STOP
SET
DAY OFF
ZONE
ENERGY SAVE
COOL
CLOCK
OFF
C
TIMER
OFF
TIMER
4. INDOOR UNIT OPERATION
OFF
SET
04-01
1
2
To Next Page
Loading...
Need help?
General
