Furuno FA-150 User Manual

FURUNO FA-150
SPECIFICATIONS OF U-AIS TRANSPONDER
-150 FA
1 TRANSPONDER UNIT
1.1 TX/RX frequency 156.025 MHz to 162.025 MHz
1.2 Output power 1W or 12.5 W selectable
1.3 Impedance 50 ohms
1.4 DSC receiver CH70 fixed, 156.525 MHz, G2B, 1200 bps
1.5 Bandwidth 25 kHz/ 12.5 kHz
2 MONITOR UNIT
2.1 Display 4.5-inch, monochrome LCD
2.2 Display size 60 (H) x 95 (W) mm, 120 x 64 dots
3 GPS RECEIVER
3.1 Receiving frequency 1575.42 MHz
3.2 Tracking code C/A code
3.3 Number of channel 12 channels parallel, 12 satellites
3.4 Position fixing method All in view, 8-state Kalman filter
3.5 Accuracy
GPS 10 m approx, 95% of the time, (HDOP ≤ 4)
DGPS 5 m approx, 95% of the time
3.6 Tracking velocity 900 kt
3.7 Position-fixing time Warm start: 36 s, Cold start: 43 s
3.8 Position update interval 1 second typical
3.9 DGPS data receiving RTCM SC-104 ver-2.1
4 INTERFACE
4.1 Navigation I/O 4 ports, IEC 61162-1 Ed.4 (Nov-10) or 61162-2 (Sep-98)
Input VSD, SSD, ABM, BBM, ACA, ACK, AIR, DTM, GBS, GGA, GLL,
GNS, HDT, LRF, LRI, OSD, RMC, ROT, THS, VBW, VTG
Output VDM, VDO, ABK, ACA, ALR, TXT, LR1, LR2, LR3, LRF, LRI
4.2 Sensor input IEC 61162-1 Ed.4 (Nov-10): 3 ports and 61162-2(Sep-98): 3 ports
DTM, GBS, GGA, GLL, GNS, HDT, OSD, RMC, ROT, THS, VBW,
VTG
4.3 External beacon or PC RS-232C
4.4 Heading sensor AD-10 format
4.5 Alarm output Contact closure
4.6 Bluesign input Contact closure
SP-1 E4431S01K
111024

Furuno FA-150 Specifications

General

Modulation	GMSK
Operating Temperature	-15°C to +55°C
Frequency	156.025 MHz to 162.025 MHz
Display	LCD
Frequency Range	156.025 MHz to 162.025 MHz
Current Consumption	1.5 A (max)