1. OPERATION
1-22
1.7.3 Dangerous (target) list
You can easily find dangerous ships whose CPA and TCPA are lower than the
CPA and TCPA alarm settings.
1. At the plotter display, press the DISP key to show the Target List (see
section 1.7.2).
Note 1: If the target list appears, press ► to show the dangerous list.
Note 2: Targets are automatically sorted by TCPA when no key is operated
for 30 seconds. Target order is then updated every five seconds.
2. Press ► to show the Dangerous List.
3. T
o find detailed information about a dangerous target, use ▼ or ▲ to select
the target then press the ENT key.
4. To change page: ▼ or ► to go forward; ▲ or ◄ to go back.
Note 1: The message “LOST” appears at the top of the Dangerous List when
no AIS signal is received from the target selected.
Note 2: CPA and TCPA are automatically updated when AUTO SORT on the
USER SETTINGS menu is OFF, however target order is not updated. To do
this, press ◄, and the targets are sorted in TCPA order.
“NOW SORTING” is shown while sorting.
1.7.4 Static data display
The OWN STATIC DATA display shows, on five pages, your ship’s static data,
which includes MMSI, call sign and name, IMO number, type of ship and
location of position-fixing antenna. This data should be checked once per
voyage or once per month whichever is shorter. Data may be changed only on
the authority of the master.
1. At the plotter display, press the DISP key twice to show “OWN STATIC
DATA”. See the next page.
2. To view other own static data: ▼ or ► to go forward, ▲ or ◄ to go back.
See the illustration on the next page for own ship’s static data examples.
To Next Page
Loading...
Need help?
General
