5. INMARSAT COMMUNICATIONS
5-22
has been disabled by the MES operator will be written over. If none has been disabled,
then the new download is not accepted.
Follow the procedure below to enable or disable an ENID.
1. Press the F4 and 2 keys to show the [EGC Network ID] screen.
2. Select the ENID to inhibit or activate.
3. Press the Enter key to enable or disable the ENID as appropriate. Enabled ENIDs
show an asterisk (*).
4. Long-press the Esc key to return to the standby display.
5.4.3 How to display the EGC message log
1. Press the F6 and 3 keys to show the [EGC Message] log.
Scroll: ↑, ↓
Display message: Press the Enter key.
Save message: Press the E key while pressing and holding down the Ctrl key.
Delete message: Press the D key to show the Delete window. [Yes] is selected;
press the Enter key.
2. Long-press the Esc key to return to the standby display.
Ctrl+P: Print
Mark '*' means activation.
01
02
03
04
05
*
*
*
*
*
11111
22222
33333
44444
55555
EGC Network ID List
EGC Message
Message No. LES Priority Size Seq. No. Rec date&Time Type
E0021118.028
KDDI Urgent 428 01641 11-11-25 10:27 MET/NAV
E0021118.028
KDDI Safety 428 02035 11-11-11 05:21 U.M Rct
Memory available: 32767 Bytes
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
[ENTER]: Show Detail
[Ctrl]+[E]: Export [Ctrl]+[P]: Print [Delete]: Delete
To Next Page
Loading...
Need help?
General
