6. DATA REPORT AND POLLING
6-9
6.4 EPADR (Enhanced Pre-Assigned Data Report-
ing)
EPADR increases the efficiency of maritime data reporting, allowing vessels using
satellite services to reliably send position reports and comply with the International
Maritime Organization's (IMO) new Long Range Identification and Tracking (LRIT)
regulations.
6.4.1 How to prepare a data report
1. Press the F5 and 3 keys to show the [EPADR] menu.
2. Press the appropriate numeric key to select a data report. For example, press the
1 key to select [EPADR 1].
3. [Status] is selected; press the Enter key to open the status options window.
4. Select appropriate option then press the Enter key.
OFF: Data report off
ON: Data report on
5. Select [Report Length] then press the Enter key.
6. Select appropriate option then press the Enter key.
Position only: Own position
Position and Course/Speed: Position, course and speed
Position and Course/Speed and SEA INF: Position, course, speed, water tem-
perature, tide, and depth
7. Select [DNID] then press the Enter key.
8. Select DNID desired then press the Enter key. (LES ID and Member No. are au-
tomatically selected according to DNID.)
9. Select [Interval Time] then press the Enter key.
10. Select an interval (15 min, 30 min, 1 hr, 3 hrs, 4 hrs, 6 hrs, 8 hrs) then press the
Enter key.
11. Select [Report Times] then press the Enter key.
12. Enter the number of times to transmit then press the Enter key. (Data is transmit-
ted only the number of times specified.)
EPADR1
Status ON
Report Length Position and Course/Speed
Destination
DNID 21100
LES ID 203
Member No. 020
Activation Regular Interval
Interval Time 1 hour
Report Times 600
Requested by LES
Enhanced Pre-Assigned Data Report (EPADR) Programming
To Next Page
Loading...
Need help?
General
