Furuno FI-70 User Manual

2. DISPLAY CATEGORIES AND CATEGORY SPECIFIC MENUS
2-3
2.3 Engine Category
Note: Data shown in the engine category is input from engine sensors. Always check
any malfunction at the engine, do not rely solely on the FI-70 indication
This category displays various engine information for up to three engines.
For details on engine status indicators, see "Engine Error Icons" on page 6-4.
Press the function key to cycle through the following data on the Engine display:
Displayable data Description
Eng. Temp. Displays the engine temperature.
Fuel Used Displays the amount of fuel used.
Fuel Rate Displays the consumption rate of fuel.
Boost Displays the boost psi.
Eng. Hour Displays the engine hours.
Oil Press. Displays the oil pressure.
Oil Temp. Displays the oil temperature.
Coolant P Displays the coolant pressure.
E Load Displays the engine load.
Gear Oil T Displays the gear oil temperature.
Gear Oil P Displays the gear oil pressure.
Currently selected gear is highlighted.
F: Forward, N: Neutral, R: Reverse
x1000
RPM
3280
Eng. Temp.
125.6
Two engine display
Eng. Temp. ºF
x1000 x1000
2600 3320
136
°F
-16
°F
Three engine display
Eng. Temp. ºF
RPM
135025003530
293 193 -13
1
1
1
1
2
2
3
4
4
3
Engine RPM
Status indications
Press function key to
change data displayed.

Furuno FI-70 Specifications

General

Brand	Furuno
Model	FI-70
Category	Marine Equipment
Language	English