AP-24
APPENDIX 7 THERMAL PRINTER
UTP-58E
Printer usage cautions
Paper usage cautions
The surface of the thermal paper is coated with special chemicals and the characters are printed
out by thermochemical reaction.
Specifications, Parts of the Printer
Specifications
Parts
• Do not disassemble or attempt to repair the printer.
• Do not allow water to enter the printer.
• Do not drop or jar the printer.
• Fix a paper jam after turning off the power.
• Turn off the power when there is some problem (for example, strange smell or smoke), and confirm
that the trouble is not continuous.
• Use specified thermal roll paper.
• Keep in a cool, dry place.
• Keep paper away from hard objects, solvents and vinyl film to prevent paper discoloration.
• Use water-based glue (starch glue, synthetic glue, etc.) when pasting thermal paper.
• Adhesive tape can discolor the thermal paper. Use double-sided tape on the reverse side of the
paper.
• Do not touch the paper with wet hands. Fingerprints may appear on the recording or the recording
may become blurred.
1. Thermal roll paper Paper type: TP058-30CL (Code no. 000-154-047-10)
Width of paper: 57 mm
External diameter of roll paper: max φ50 mm
Length of paper: 30 m
2. Environmental conditions Useable temperature: 0 to +50°C
Useable humidity: 30 to 80% RH (no condensation)
Storage temperature: -20 to +60°C
Storage humidity: 20 to 85% RH (no condensation)
Front side
Rear side
Paper cover
open button
Paper cutter
Paper cover
DIP switch
Connector for
interface
To Next Page
Loading...
Need help?
General
