Furuno GP-170 User Manual

5. DESTINATION
5-5
4. Move the cursor to [Enter] then press the NU/CU ENT key.
[TTG (Manual)]: Time to go calculated by SOG set on page 4-2
[TTG (Estimated)]: Time to go calculated by actual SOG
5. Press the NU/CU ENT key then press the MENU/ESC key to close the main
menu.
5.4 How to Display the ETA and TTG
You can display the ETA and TTG to waypoints on the plotter display.
ETA: The arrival date and time calculated by SOG set on page 4-2
TTG: The arrival date and time calculated by actual SOG (TTG is displayed when the
SOG is 0.4 kn or above.)
When the departure date and time set is before the current date and time, the ETA
and TTG are calculated by the staying time set. When the departure date and time set
is after the current date and time, the ETA and TTG are calculated by the departure
time set. See "Staying time" and "Departure time" on page 4-2.
1. Press the MENU/ESC key to open the main menu.
2. Select [3 Navigation] then [3 Display ETA/TTG].
3. Select [1 Off], [2 ETA] or [3 ETA+TTG].
[Off]: Hides the ETA and TTG.
[ETA]: Shows the ETA.
[ETA+TTG]: Shows the ETA and TTG.
4. Press the MENU/ESC key to close the main menu.
POINT0001
POINT0002
POINT0003
POINT0004
2014/04/11
10:07
2014/04/11
10:05
2014/04/12
13:15
2014/04/12
13:13
2014/04/13
15:23
2014/04/13
15:22
ETA is shown in green.
TTG is shown in pink.

Furuno GP-170 Specifications

General

Brand	Furuno
Model	GP-170
Category	GPS
Language	English