SSE-14-0022_17
3
1.3. Shut down the Radar System
1) Case of Windows version installed in PXI
*Please ask either Windows or RT version from Furuno if you are not sure.
Process of the Display Unit operation is necessary when shut down the Signal Processing Unit.
Caution: It may break down if remove a plug or turn off a breaker without following this process.
(1) Go into the remote desktop screen by clicking the icon of [PXI.RDP] on a
screen of the Display Unit.
OR
Swipe in from the right edge of windows screen. Then click [Search] to
look for “Remote Desktop connection” to indicate a dialog box.
(2) Enter “192.168.1.100” (IP address of PXI) in a
column of [Computer] on Remote Desktop
connection screen.
(3) Enter “WR” on password of “WR” account in a
Windows Security. And then click [OK].
(4) If security message shows up on a screen, click [Yes] to continue.
To Next Page
Loading...
Need help?
General
