GAPOSA QC09 User Manual

8
PROGRAM OTHER TRANSMITTERS
1. Press and hold PROG-TX button of the MASTER transmitter till the motor starts moving.
The motor is now in programming mode.
2. Press and hold PROG-TX button of the MASTER transmitter till the motor starts moving. The motor is
now in programming mode.
RESET MEMORY
To cancel transmitters from the motor’s memory, press PROG-TX and STOP buttons of the MASTER
transmitter simultaneously and release them when the motor jogs indicating that any transmitter is
cancelled.
RESET MEMORY WITHOUT THE MASTER TRANSMITTER
To cancel programmed transmitters without the MASTER:
1. Cut the power
2. Press simultaneously PROG-TX and STOP buttons of whatever transmitter and switch on the power
till the motor jogs indicating that any transmitter is cancelled.
UP
DOWN
PROG-TX
1 2a 2b
STOP
PROG-TX
STOP
PROG-TX
2
PROG-TX
ON
STOP
PROG-TX
QC09
Remote Control Unit for shutters and awnings.
STOP
MASTER

GAPOSA QC09 Specifications

General

Brand	GAPOSA
Model	QC09
Category	Remote Control
Language	English