41
Main Menu Pages
Using the Setup Menu
The Setup Menu allows you to setup several aspects of the Foretrex 101, such as the
timer, display, interface, and system. You must access the Setup Menu and then select one
of the options in the Setup Menu to access the individual Setup Pages. The Setup Menu
contains the following pages: Set Timer, Set Time, Set Display, Set Units, Set Heading, Set
Interface, and Set System.
To access a Setup Page:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the
UP and DOWN buttons to highlight ‘SETUP’ and press ENTER.
3. Use the
UP and DOWN buttons to highlight the desired Setup Page, such as ‘SET
TIMER’ and press ENTER.
Set Timer Page
By default, the Timer Page is not displayed. You must access the Main Menu and enable
the Timer Page before you can display and use it.
To show the Timer Page:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the
UP and DOWN buttons to highlight ‘SETUP’ and press ENTER.
3. Use the
UP and DOWN buttons to highlight ‘SET TIMER’ and press ENTER.
4. Use the UP and DOWN buttons to highlight the field below ‘SHOW TIMER PAGE’ and
press ENTER.
5. Use the UP and DOWN buttons to highlight ‘YES’ and press ENTER.
6. Press the PAGE button to exit the menu pages.
Setup Menu: Set Timer
Setup Menu
Set Timer Page
To Next Page
Loading...
Need help?
General