42
Main Menu Pages
Setting the Timer
You can set the timer to count down from a particular time. For example, if you are in a
race that has a two-minute warning before the start, program your Foretrex to count down
from two minutes. You can also set the action the timer takes when it expires.
To set the Timer:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the
UP and DOWN buttons to highlight ‘SETUP’ and press ENTER.
3. Use the
UP and DOWN buttons to highlight ‘SET TIMER’ and press ENTER.
4. Use the UP and DOWN buttons to highlight the field below ‘COUNT DOWN FROM’ and
press ENTER.
5. Use the UP and DOWN buttons to highlight the desired time (10, 6, 5, or 4 minutes)
and press ENTER. You can also enter a ‘CUSTOM’ time as described below.
To enter a custom time:
1. Press the PAGE button until the Main Menu Page is displayed.
2. Use the
UP and DOWN buttons to highlight ‘SETUP’ and press ENTER.
3. Use the
UP and DOWN buttons to highlight ‘SET TIMER’ and press ENTER.
4. Use the UP and DOWN buttons to highlight the field below ‘COUNT DOWN FROM’ and
press ENTER. Highlight ‘CUSTOM’ and press ENTER. The Edit Time Page is displayed.
5. Use the
UP and DOWN buttons to highlight the number position you want to change
and press ENTER.
6. Use the UP and DOWN buttons to highlight the desired number and press ENTER.
Repeat this process until the number you would like to count down from is entered.
7. Use the
UP and DOWN buttons to highlight ‘OK’ and press ENTER.
Setup Menu: Set Timer
Set Timer Page
Setting the Count Down From field
Edit Time Page
To Next Page
Loading...
Need help?
General