Garmin eTrex 30 User Manual

eTrex Owner’s Manual 17
Navigation
• Select a location on the map,
and the bar at the top of the
screen shows information about
the selected location.
Navigating a Driving Route
Driving route navigation is only
available on the eTrex 20 and eTrex 30.
Before you can use the map, you must
purchase and load City Navigator
maps. If you plan to use an auto mount
accessory with the device, you must
also purchase and install the mount in
your vehicle.
1. Select Prole Change >
Automotive.
2. Use the map to navigate to the
destination.
3. Follow the turns in the text bar
along the top of the map.
Compass
The eTrex 30 has a 3-axis, electronic
compass.
You can use a bearing pointer or a
course pointer to navigate to your
destination.
TIP: When the device is using the
automotive prole, the compass
displays GPS heading, not magnetic
heading.
Calibrating the Compass
notice
Calibrate the electronic compass
outdoors. To improve heading
accuracy, do not stand near objects that
inuence magnetic elds, such as cars,
buildings, or overhead power lines.

Garmin eTrex 30 Specifications

General

Outdoor (hiking, trekking)	Yes
Marine (chartplotters, sounders)	No
Routes quantity	200
Number of waypoints	2000
Form factor	Handheld
Display diagonal	2.2 \
Display resolution	176 x 220 pixels
Display number of colors	65536 colors
Display size (HxV) (imperial)	1.7 x 1.4 \
Internal memory	1740 MB
USB 2.0 ports quantity	1
Battery type	AA
Battery life (max)	25 h
Battery technology	Nickel-Metal Hydride (NiMH)
Number of batteries supported	2

Weight and Dimensions

Depth	33 mm
Width	54 mm
Height	103 mm
Weight	141.7 g