1.
Taillight key. Select to signal a left turn when using two taillights.
NOTE: The turn signal feature is available on the Varia TL 300 only.
Hold to change the taillight operating modes.
2.
Headlight key. Select to switch between low beam and high beam. Hold to change the headlight
operating modes.
3.
Taillight key and power key. Select to signal a right turn when using two taillights.
Hold to turn all lights on and off.
4. Status LED.
Status LED
LED Activity Status
Flashing green Searching for a paired device.
Alternating red and green Attempting to pair with a device. A turn indicator is on.
12 rapid green flashes Successfully paired with a device.
Solid red Pairing failed or the connection was lost.
Flashing red One or more of the paired devices has a low battery.
Pairing the Remote with Your Varia Device
The first time you connect the Varia remote to your Varia device, you must pair the remote with your device.
1. Bring the remote within 1 m (3 ft.) of the device.
NOTE: You must stay 10 m (33 ft.) away from other ANT+ sensors while pairing.
2. On the Varia device, hold the device key for 1 second to turn it on.
3. Select the Varia device key to enter smart mode. The status LED starts flashing blue.
4. On the Varia remote, hold two keys simultaneously until the status LED starts alternating green and red, and release the keys.
The remote searches for your Varia device. After the remote pairs successfully, the status LED flashes green 12 times.
After the remote is paired, it connects to your device whenever the device is in range and turned on in smart mode. You may need to wake the remote by
selecting any key.
Using the Mounts
Several mounts are available for your remote, either included with the product or as an optional accessory. The mounts allow you to attach the remote to your
body, your bike, or other objects.
Align two of the notches 1with the sides of the mount, and press the remote into the mount until it clicks.
Press gently on the release tab 2 , and lift the remote from the mount.
Replacing the Battery
WARNING
Do not use a sharp object to remove batteries.
To Next Page
Loading...
Need help?
General
