zūmo 500/550 Owner’s Manual
GettinG Started
Mounting the zūmo on Your Motorcycle
WARNING: The terms of the Garmin warranty require that the power cable
with bare wire leads be installed by experienced installers having the proper
knowledge of automotive electrical systems and skill in the use of special tools
or hardware required for installation.
1: Connect Power to the Mount
Select a suitable and secure location to mount the zūmo on your motorcycle based on
available power sources and safe cable routing.
Bare wres
wth nlne
fuse for power
connecton
Power connector
About Connecting Audio
Standard jacks for microphone (2.5 mm) and audio out (3.5 mm) are located on the
left side of the mount (under a weather cap). When connecting your audio system to
the zūmo, be sure to consider the pathways needed to route the necessary cables. For
information about hands-free audio and phone options, see page 23. For additional
audio congurations, see page 49.
2: Install the Handlebar Base
The zūmo includes parts for two handlebar installation solutions. Custom mounts can
require additional hardware (www.ram-mount.com).
Autogood products internet store http://130.com.ua
To Next Page
Loading...
Need help?
General
