11
WALL MOUNTING
NOTE: For best results, charge the telephone/answering system on a flat
surface before hanging it on the wall.
Slip the mounting holes (on the back of the base) over the wall plate posts
and slide the unit down into place. (Wall plate not included.)
ANSWERING SYSTEM SETUP
This section shows you how to set up your answering system to receive
incoming calls. Before you begin the set up process, you must turn on the
answering system.
• Press the ans on/off button to turn the answering system on and off.
The MESSAGES indicator lights when the answering system is on. The
indicator blinks when you have new messages.
NOTE: The answering system displays “- -” when it is off.
VOICE TIME/DAY STAMP
1. Make sure the answering system is ON.
2. Press and hold the day/check button on the base to set the day of the week.
To Next Page
Loading...
Need help?
General
