25
SCREENING CALLS FROM THE HANDSET
Use the handset to screen calls even when you can't hear the
answering system.
When the answering system picks up:
1. Press the format/answerer button to access the answering system.
2. Listen as the caller leaves a message.
3. Press the talk/callback button to speak to the person or press the format/
answerer button to stop screening the call.
MEMORY FULL
When answering system memory is full, the system answers after 10
rings, beeps and waits for you to enter the 3-digit security code. If you
don't enter the security code within 10 seconds, the phone hangs up.
You should erase some messages so the answering system can record
new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
ACCESSING THE ANSWERING SYSTEM FROM ANOTHER LOCATION
You can access your answering system from any touch-tone phone by entering
your 3-digit security code after you hear the outgoing announcement.
1. Dial the telephone number to which the answering system is connected to.
2. Enter the security code after you hear the tone.
3. Follow the voice menu to use the answering system's remote functions.
The remote feature lets you perform the following functions:
To Press this Button
Review message 1
Play back messages 2
Stop message playback 2
To Next Page
Loading...
Need help?
General
